Part # 70-231-520
Duraflex Short Stands have fulcrum units identical to the one-meter and three-meter stands, and similar handrails and anchoring units. They are designed for use on concrete pedestals or platforms, with the use of six Bronze Deck Anchors or six Hilti stainless steel threaded inserts, at either one or three-meter level. This model is supplied with top and intermediate handrails on two sides. Catalog # 70-231-520.
SPECIFICATIONS: The Diving Stand Anchor and Fulcrum Assembly, Catalog #70-231-520, “Short Stand” is designed for mounting on a concrete, steel, or other field-fabricated diving platform. The diving stand consists of heavy aluminum castings finished with epoxy powder-coating. The roller and tracks are heat treated and hard-anodized extruded aluminum. The bearings, for the roller and the tracks, are Teflon/polymer with grease path. The diving board anchor hinges are heat treated aluminum forgings with a design tensile strength of 35,000 psi and are hard anodized. The diving board anchor bolts are custom short-neck 5/8” diameter by 3 1/2” long stainless steel carriage bolts, specially designed to work on the Duraflex diving boards. The diving stand is supplied with top and intermediate handrails on two sides. The diving stand handrails are 304 stainless steel tubing, firmly attached to the handrail supports with stainless steel rail clamps. The rails extend to the edge (or beyond) of the swimming pool and the rail ends are fitted with handrail plugs. The stand is designed for mounting with the use of six Bronze Deck Anchors (Duraflex Catalog #70-231-900) or mounting with six Hilti stainless steel threaded inserts (Duraflex Catalog# 70-231-901).